比特幣Bitcoin,以太幣ETH挖礦,達世幣Dash,電腦軟硬體
2024 三月 19, 下午 05:57 *
歡迎光臨, 訪客. 請先 登入註冊一個帳號.

請輸入帳號, 密碼以及預計登入時間
 
   首頁   說明 登入 註冊  
頁: 1
  列印  
作者 主題: vertminer 參數  (閱讀 4537 次)
苦勞礦工
工友
Lv: 5
******
文章: 2,079


« 於: 2014 三月 22, 下午 08:00 »

vertminer 參數

F:\vertminer>vertminer -h
vertminer 0.5.2

Built with GPU scrypt mining support.
Usage: vertminer [-DdGEgIKklpPQqUsTouvwOchnV]

Options for both config file and command line:
--api-allow <arg>   Allow API access only to the given list of [G:]IP[/Prefix] addresses[/subnets]
--api-description <arg> Description placed in the API status header, default: cgminer version
--api-groups <arg>  API one letter groups G:cmd:cmd[,P:cmd:*...] defining the cmds a groups can use
--api-listen        Enable API, default: disabled
--api-mcast         Enable API Multicast listener, default: disabled
--api-mcast-addr <arg> API Multicast listen address
--api-mcast-code <arg> Code expected in the API Multicast message, don't use '-'
--api-mcast-des <arg> Description appended to the API Multicast reply, default: ''
--api-mcast-port <arg> API Multicast listen port (default: 4028)
--api-network       Allow API (if enabled) to listen on/for any address, default: only 127.0.0.1
--api-port <arg>    Port number of miner API (default: 4028)
--auto-fan          Automatically adjust all GPU fan speeds to maintain a target temperature
--auto-gpu          Automatically adjust all GPU engine clock speeds to maintain a target temperature
--balance           Change multipool strategy from failover to even share balance
--benchmark         Run cgminer in benchmark mode - produces no shares
--compact           Use compact display without per device statistics
--debug|-D          Enable debug output
--device|-d <arg>   Select device to use, one value, range and/or comma separated (e.g. 0-2,4) default: all
--disable-gpu|-G    Disable GPU mining even if suitable devices exist
--disable-rejecting Automatically disable pools that continually reject shares
--expiry|-E <arg>   Upper bound on how many seconds after getting work we consider a share from it stale (default: 120)
--failover-only     Don't leak work to backup pools when primary pool is lagging
--fix-protocol      Do not redirect to a different getwork protocol (eg. stratum)
--gpu-dyninterval <arg> Set the refresh interval in ms for GPUs using dynamic intensity (default: 7)

--gpu-platform <arg> Select OpenCL platform ID to use for GPU mining (default: -1)
--gpu-threads|-g <arg> Number of threads per GPU (1 - 10) (default: -1)
--gpu-engine <arg>  GPU engine (over)clock range in Mhz - one value, range and/or comma separated list (e.g. 850-900,900,750-850)
--gpu-fan <arg>     GPU fan percentage range - one value, range and/or comma separated list (e.g. 0-85,85,65)
--gpu-map <arg>     Map OpenCL to ADL device order manually, paired CSV (e.g. 1:0,2:1 maps OpenCL 1to ADL 0, 2 to 1)
--gpu-memclock <arg> Set the GPU memory (over)clock in Mhz - one value for all or separate by commas for per card
--gpu-memdiff <arg> Set a fixed difference in clock speed between the GPU and memory in auto-gpu mode
--gpu-powertune <arg> Set the GPU powertune percentage - one value for all or separate by commas for per card
--gpu-reorder       Attempt to reorder GPU devices according to PCI Bus ID
--gpu-vddc <arg>    Set the GPU voltage in Volts - one value for all or separate by commas for per card
--lookup-gap <arg>  Set GPU lookup gap for scrypt mining, comma separated
--intensity|-I <arg> Intensity of GPU scanning (d or -10 -> 20,default: d to maintain desktop interactivity)
--kernel-path|-K <arg> Specify a path to where bitstream and kernel files are (default: "/usr/local/bin")
--kernel|-k <arg>   Override sha256 kernel to use (diablo, poclbm, phatk or diakgcn) - one value orcomma separated
--load-balance      Change multipool strategy from failover to quota based balance
--log|-l <arg>      Interval in seconds between log output (default: 5)
--lowmem            Minimise caching of shares for low memory applications
--net-delay         Impose small delays in networking to not overload slow routers
--no-adl            Disable the ATI display library used for monitoring and setting GPU parameters
--no-restart        Do not attempt to restart GPUs that hang
--submit-stale      submit shares if they are detected as stale - not recommended
--pass|-p <arg>     Password for bitcoin JSON-RPC server
--per-device-stats  Force verbose mode and output per-device statistics
--protocol-dump|-P  Verbose dump of protocol-level activities
--queue|-Q <arg>    Minimum number of work items to have queued (0+) (default: 1)
--quiet|-q          Disable logging output, display status and errors
--quota|-U <arg>    quota;URL combination for server with load-balance strategy quotas
--real-quiet        Disable all output
--remove-disabled   Remove disabled devices entirely, as if they didn't exist
--rotate <arg>      Change multipool strategy from failover to regularly rotate at N minutes (default: 0)
--round-robin       Change multipool strategy from failover to round robin on failure
--scan-time|-s <arg> Upper bound on time spent scanning current work, in seconds (default: -1)
--sched-start <arg> Set a time of day in HH:MM to start mining (a once off without a stop time)
--sched-stop <arg>  Set a time of day in HH:MM to stop mining (will quit without a start time)
--scrypt-vert       Use the scrypt-vert algorithm for mining (vertcoin only)
--shaders <arg>     GPU shaders per card for tuning scrypt, comma separated
--sharelog <arg>    Append share log to file
--shares <arg>      Quit after mining N shares (default: unlimited)
--socks-proxy <arg> Set socks4 proxy (host:port)
--temp-cutoff <arg> Temperature where a device will be automatically disabled, one value or comma separated list (default: 95)
--temp-hysteresis <arg> Set how much the temperature can fluctuate outside limits when automanagingspeeds (default: 3)
--temp-overheat <arg> Overheat temperature when automatically managing fan and GPU speeds, one value or comma separated list (default: 85)
--temp-target <arg> Target temperature when automatically managing fan and GPU speeds, one value orcomma separated list (default: 75)
--text-only|-T      Disable ncurses formatted screen output
--thread-concurrency <arg> Set GPU thread concurrency for scrypt-vert mining, comma separated
--url|-o <arg>      URL for bitcoin JSON-RPC server
--user|-u <arg>     Username for bitcoin JSON-RPC server
--vectors|-v <arg>  Override detected optimal vector (1, 2 or 4) - one value or comma separated list

--verbose           Log verbose output to stderr as well as status output
--worksize|-w <arg> Override detected optimal worksize - one value or comma separated list
--userpass|-O <arg> Username:Password pair for bitcoin JSON-RPC server
--worktime          Display extra work time debug information

===

Options for command line only:
--config|-c <arg>   Load a JSON-format configuration file

See example.conf for an example configuration.
--default-config <arg> Specify the filename of the default config file
Loaded at start and used when saving without a name.
--help|-h           Print this message
--ndevs|-n          Display number of detected GPUs, OpenCL platform information, and exit
--version|-V        Display version and exit
已記錄

歡迎自由轉載我的發文, 方便的話 請註明來源為:
http://killvirus.org
---
頁: 1
  列印  
 
前往:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2006-2008, Simple Machines Valid XHTML 1.0! Valid CSS!