官網:
http://heavycoin.github.io交易網站:
https://www.mintpal.com/market/HVC/BTC挖礦軟體:
http://cryptomining-blog.com/tag/ccminer-hvc-gpu-miner/挖礦效率計算器:
http://cryptoage.com------
hvc挖礦會很耗用cpu資源,
若是G1820 ,
五卡挖礦會使用30-40%的cpu,
造成速度下降。
改成G3420 可能會比較好。
-----
在 heavycoin-qt 的 設定中, 要關閉掉 [Mine Heavycoin]的選項, 不然會啟動CPU挖礦,
造成 GPU挖礦時, 速度 完全不行...
=================
參數
C:\ccminer>ccminer35.exe -h
*** ccMiner for nVidia GPUs by Christian Buchner and Christian H. ***
This is version 0.5 (beta)
based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler
based on pooler-cpuminer extension for HVC from
https://github.com/heavycoin/cpuminer-heavycoin and
http://hvc.1gh.com/ Cuda additions Copyright 2014 Christian Buchner, Christian H.
LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm
BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM
YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4
Usage: minerd [OPTIONS]
Options:
-a, --algo=ALGO specify the algorithm to use
fugue256 Fuguecoin hash
heavy Heavycoin hash
-d, --devices takes a comma separated list of CUDA devices to use.
Device IDs start counting from 0! Alternatively takes
string names of your cards like gtx780ti or gt640#2
(matching 2nd gt640 in the PC)
-v, --vote=VOTE block reward vote (for HeavyCoin)
-m, --trust-pool trust the max block reward vote (maxvote) sent by the pool
-o, --url=URL URL of mining server
-O, --userpass=U:P username:password pair for mining server
-u, --user=USERNAME username for mining server
-p, --pass=PASSWORD password for mining server
--cert=FILE certificate for mining server using SSL
-x, --proxy=[PROTOCOL://]HOST[:PORT] connect through a proxy
-t, --threads=N number of miner threads (default: number of nVidia GPUs)
-r, --retries=N number of times to retry if a network call fails
(default: retry indefinitely)
-R, --retry-pause=N time to pause between retries, in seconds (default: 30)
-T, --timeout=N network timeout, in seconds (default: 270)
-s, --scantime=N upper bound on time spent scanning current work when
long polling is unavailable, in seconds (default: 5)
--no-longpoll disable X-Long-Polling support
--no-stratum disable X-Stratum support
-q, --quiet disable per-thread hashmeter output
-D, --debug enable debug output
-P, --protocol-dump verbose dump of protocol-level activities
--benchmark run in offline benchmark mode
-c, --config=FILE load a JSON-format configuration file
-V, --version display version information and exit
-h, --help display this help text and exit
========================
heavycoin-qt
選項:
-? 此協助訊息
-conf=<file> Specify configuration file (default: heavycoin.conf)
-pid=<file> Specify pid file (default: heavycoind.pid)
-gen 生產位元幣 (預設值: 0)
-datadir=<dir> 指定資料目錄
-dbcache=<n> 設定資料庫快取大小為多少百萬位元組(MB, 預設: 25)
-timeout=<n> 指定連線在幾毫秒後逾時 (預設: 5000)
-proxy=<ip:port> 透過 SOCKS 代理伺服器連線
-socks=<n> 選擇 SOCKS 代理伺服器的協定版本(4 或 5, 預設: 5)
-tor=<ip:port> 透過代理伺服器來使用 Tor 隱藏服務 (預設: 同 -proxy)
-dns 允許對 -addnode, -seednode, -connect 的參數使用域名查詢
-port=<port> Listen for connections on <port> (default: 7203 or testnet: 17203)
-maxconnections=<n> 維持與節點連線數的上限為 <n> 個 (預設: 125)
-addnode=<ip> 加入一個要連線的節線, 並試著保持對它的連線暢通
-connect=<ip> 只連線至指定節點(可多個)
-seednode=<ip> 連線到某個節點以取得其它節點的位址, 然後斷線
-externalip=<ip> 指定自己公開的位址
-onlynet=<net> 只和 <net> 網路上的節點連線 (IPv4, IPv6, 或 Tor)
-discover 找出自己的網際網路位址 (預設: 當有聽候連線且沒有 -externalip 時為 1)
-checkpoints 只接受與內建的檢查段點吻合的區塊鎖鏈 (預設: 1)
-listen 是否接受外來連線 (預設: 當沒有 -proxy 或 -connect 時預設為 1)
-bind=<addr> 和指定的位址繫結, 並總是在該位址聽候連線. IPv6 請用 "[主機]:通訊埠" 這種格式
-dnsseed 是否允許在找節點時使用域名查詢 (預設: 當沒用 -connect 時為 1)
-banscore=<n> 與亂搞的節點斷線的臨界值 (預設: 100)
-bantime=<n> 避免與亂搞的節點連線的秒數 (預設: 86400)
-maxreceivebuffer=<n> 每個連線的接收緩衝區大小上限為 <n>*1000 個位元組 (預設: 5000)
-maxsendbuffer=<n> 每個連線的傳送緩衝區大小上限為 <n>*1000 位元組 (預設: 1000)
-paytxfee=<amt> 交易付款時每 KB 的交易手續費
-server 接受命令列與 JSON-RPC 指令
-testnet 使用測試網路
-debug 輸出額外的除錯資訊. 包含了其它所有的 -debug* 選項
-debugnet 輸出額外的網路除錯資訊
-logtimestamps 在除錯輸出內容前附加時間
-shrinkdebugfile 客戶端軟體啓動時將 debug.log 檔縮小 (預設: 當沒有 -debug 時為 1)
-printtoconsole 在終端機顯示追蹤或除錯資訊, 而非寫到 debug.log 檔
-printtodebugger 輸出追蹤或除錯資訊給除錯器
-rpcuser=<user> JSON-RPC 連線使用者名稱
-rpcpassword=<pw> JSON-RPC 連線密碼
-rpcport=<port> Listen for JSON-RPC connections on <port> (default: 7202 or testnet: 17202)
-rpcallowip=<ip> 只允許從指定網路位址來的 JSON-RPC 連線
-rpcthreads=<n> 設定處理 RPC 服務請求的執行緒數目 (預設為 4)
-blocknotify=<cmd> 當最新區塊改變時所要執行的指令 (指令中的 %s 會被取代為區塊的雜湊值)
-walletnotify=<cmd> 當錢包有交易改變時所要執行的指令 (指令中的 %s 會被取代為交易識別碼)
-alertnotify=<cmd> 當收到相關警示時所要執行的指令 (指令中的 %s 會被取代為警示訊息)
-upgradewallet 將錢包升級成最新的格式
-keypool=<n> 設定密鑰池大小為 <n> (預設: 100)
-rescan 重新掃描區塊鎖鏈, 以尋找錢包所遺漏的交易.
-salvagewallet 嘗試從壞掉的錢包檔 wallet.dat 復原密鑰
-checkblocks=<n> 啓動時檢查的區塊數 (預設: 288, 指定 0 表示全部)
-checklevel=<n> 區塊檢查的仔細程度 (0 至 4, 預設: 3)
-txindex 維護全部交易的索引 (預設為 0)
-loadblock=<file> 從其它來源的 blk000??.dat 檔匯入區塊
-reindex 從目前的區塊檔 blk000??.dat 重建鎖鏈索引
-par=<n> 設定指令碼驗證的執行緒數目 (最多為 16, 若為 0 表示程式自動決定, 小於 0 表示保留不用的處理器核心數目, 預設為 0)
區塊產生選項:
-blockminsize=<n> 設定區塊大小下限為多少位元組 (預設: 0)
-blockmaxsize=<n> 設定區塊大小上限為多少位元組 (預設: 250000)
-blockprioritysize=<n> 設定高優先權或低手續費的交易資料大小上限為多少位元組 (預設: 27000)
SSL options: (see the Bitcoin Wiki for SSL setup instructions)
-rpcssl 於 JSON-RPC 連線使用 OpenSSL (https)
-rpcsslcertificatechainfile=<file.cert> 伺服器憑證檔 (預設: server.cert)
-rpcsslprivatekeyfile=<file.pem> 伺服器密鑰檔 (預設: server.pem)
-rpcsslciphers=<ciphers> 可以接受的加密法 (預設: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH)
使用界面選項:
-lang=<lang> 設定語言, 比如說 "de_DE" (預設: 系統語系)
-min 啓動時最小化
-splash 顯示啓動畫面 (預設: 1)